Pharos, Lighthouse of the 21st Century
FAQ - Products
Products
Error Messages
MapFinder Utility
Ostia Software
GPS Hardware
Pocket PC
Other
 
Search:
Browse:
Enter KB ID#:
Knowledgebase Home Page > Products > Traveler GPS > Traveler GPS 600

The GPS Phone 600 froze, and the system is not responding. What should I do about it?

  1. You may reset your GPS Phone 600. This means to re-start the whole system to release unnecessary resources so that the system can return to normal. To do this, use your stylus to press the small reset button located on the right-hand side of the GPS Phone.
  2. If you have reset your GPS Phone 600 but it still cannot operate normally, then you need to carry out a hard reset to solve this problem. By doing this it will erase all data and restore the system to factory settings. How to carry out a cold boot: Press and hold the "Power Button" with one hand, and use the stylus tip to press the "Reset Button" with the other hand. Release the "Power Button" and the "Reset Button" at the same time. If you answer "Yes" to the two questions displayed after a cold boot. (Erase all data and load default? Delete registry only?) The programs installed by yourself, self-made settings, and self-made data (e.g., "Contacts" and "Calendar" will disappear and return to their default settings. As a result, we suggest you copy your data to the storage card. Data stored in the storage card will not vanish because of a cold boot. Or you can synchronize the data on your GPS Phone 600 with your desktop computer.


Knowledgebase ID
5
Created: 7/30/2008
Modified: 3/31/2009
Attachments
No attachments were found.

Would you like to...
Print this page
Email this to a friend

Post a comment
Rate this KB

(1.6)

Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1
Microsoft Gold Certified Partner