Pharos, Lighthouse of the 21st Century
FAQ
Products
Error Messages
MapFinder Utility
Ostia Software
GPS Hardware
Pocket PC
Other
 
Search:
Browse:
Enter KB ID#:
Knowledgebase Home Page > Products > Traveler GPS > Pharos 585

How do I use the Compass on the Pharos 585?

  1. Tap -> Compass
  2. It is required to calibrate the Compass for the first time. Or if you are using the compass in a new environment.
    1. Calibration procedure: tap on the Calibration tab
    2. Place the device in the Horizontal position, click on Start, and rotate the device according to the image below.
    3. The horizontal calibration status will change from “Ready” to “Calibration Started”. Rotate the device in the Horizontal position.
    4. You will hear a "sound chime" to alert you to begin the Vertical calibration.
    5. Rotate the device according to the image below; the Vertical calibration status will change from "Calibration Started" to "Calibration Finished". You will hear a second "sound chime" to alert you that the Vertical calibration was complete.
    6. The calibration process is now complete.
    7. You will now be able to use the compass. You will be automatically redirected to the compass screen.


Knowledgebase ID
283
Created: 5/14/2013
Modified: 5/14/2013
Attachments
No attachments were found.

Would you like to...
Print this page
Email this to a friend

Post a comment
Rate this KB

(0.0)

Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1
Microsoft Gold Certified Partner