Pharos, Lighthouse of the 21st Century
FAQ - Products
Products
Error Messages
MapFinder Utility
Ostia Software
GPS Hardware
Pocket PC
Other
 
Search:
Browse:
Enter KB ID#:
Knowledgebase Home Page > Products > Traveler GPS > Traveler GPS 127

The Traveler 127 will not power on. What should I do?

  • Make sure that the Traveler 127 battery you are using has enough power. Please make sure that the device has been charged for 8 hours.
  • Connect the Traveler 127 into the AC charger or Car charger, and make sure the red charging indicator lights up. Slide the Power button on the top of the phone to the right to turn the phone on.
  • If you have done the above but the Traveler 127 still doesn’t power on, proceed with the following steps: Remove the back cover on the Traveler 127 and verify that the battery lock is in place. If not, the system will not power on.
  • Remove the battery and replace it back on the phone.
  • Verify that the battery connectors and pins are firmly connected.
  • If you are still having problems perform a “soft reset” on the device. To do this: use your stylus to press the small reset button located on the right hand side (below the camera button) of the Traveler 127.
  • Charging time for the device:
    • Charging via AC adapter – Average 3 hours
    • Charging via USB cable – Average 5 hours


Knowledgebase ID
177
Created: 11/14/2008
Modified: 12/2/2008
Attachments
No attachments were found.

Would you like to...
Print this page
Email this to a friend

Post a comment
Rate this KB

(0.0)

Was this answer helpful:
(5 = very helpful.
0 = not helpful at all)
5 4 3 2 1
Microsoft Gold Certified Partner