SECTION 6: Ostia Toolbar Functions

6.1 GPS Status Indicator/ Enabling the GPS receiver

The Happy Face on the menu bar indicates the current status of the GPS receiver.

TAPPING THE GPS STATUS INDICATOR WILL ALLOW THE GPS TO BE ENABLED AS WELL.

Red Face	The Pocket PC is not receiving data from the GPS receiver. The connection, power and communication port should all be checked.
Yellow Face	The GPS receiver is currently acquiring signals from the satellites for a signal lock.
Green Face	A GPS signal lock has been established and the system is ready for navigation. When this happens, a red arrow should appear on the map, signifying the current position of the GPS receiver.

6.2 Zoom-in/Zoom-out

Either one of these buttons can be used to bring up the zoom scroll bar to adjust the current view of the map.

Zooming in and out can also be achieved by:

Dragging the stylus on the screen in a motion from the upper left corner towards the bottom right corner to create a box on the screen. The software will attempt to do a best- fit zoom to the area within the box. Zooming out is the opposite direction, bottom left to upper right.

6.3 Navigation Screen

Tapping on this icon will cycle through the three (3) navigation screens that can be used while driving as shown below:

Arrow/Text View

Split Arrow & Map View

Note: Tapping anywhere in the text prompt portion of the screen will manually sound the voice prompt for the current set of directions.